AT&T CL83201 - Chain Dialing

Telephone operation
36
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the
directory, caller ID history or redial memory while you are on a call.
Chain dialing is useful when you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID history or
redial list.
Using a cordless handset:
To access the directory while on a call:
1. Press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Directory and then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the caller ID log while on a call:
1. Press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Caller ID log, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1. Press REDIAL/PAUSE to show the most recently
dialed number.
2. Press qCID or pDIR to scroll to the desired number,
or press REDIAL/PAUSE repeatedly to find the desired
number. Then press. Then press MENU/SELECT to dial the number shown.
Using the telephone base:
To access the directory while on a call:
1. Press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Directory and then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
>Directory
Intercom
888-883-2445
Charlie Johnson
p
q
REDIAL #1/10
800-360-4121
p
q
>Directory
Intercom
888-883-2445
Charlie Johnson
p
q
Phone 0:01:20
Charlie Johnson
6:30
AM
8/06
Speaker 0:01:20
Charlie Johnson
6:30
AM
8/06