Multiple handset use
49
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
When your device shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows >Intercom.
Press MENU/SELECT. Your device displays Calling BASE 0 or
Calling HANDSET X. The destination device briefly shows Push to
talk Ended and then HANDSET X is calling or BASE 0 is calling. The
destination device rings.
Press PHONE/FLASH or any dialing keys (0-9,
#
or TONE ) on the
destination handset, or press /SPEAKER or any dialing keys (0-9,
#
or
TONE ) on the telephone base to answer the intercom call. Both devices
now show Intercom.
To end the intercom call, press OFF/CANCEL on your handset or place
the handset in the telephone base or charger, or press CANCEL on the
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
During a PTT call, press PHONE/FLASH on the initiating handset
or /SPEAKER on the initiating telephone base. The PTT call ends
automatically and the outside call is answered.
During a PTT call, press PHONE/FLASH on any one of the destination
handsets, or press /SPEAKER on the destination telephone base. That
device answers the outside call. The PTT call continues for the rest of the
PTT participants.
To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The
telephone continues to ring.
1.
2.
3.
4.
•
•
•
To Next Page
Loading...
Need help?
General
