Directory
58
Speed dial
The telephone system has ten speed dial locations (0 and
2-9, and 1 which is reserved for voicemail) where you can
store the telephone numbers you wish to dial more quickly.
You can store up to 30 digits in each location. Speed dial
assignments can only be selected from the existing directory
entries, with the exception of 1, which must be manually
entered. In the directory, speed dial locations except for
1, are indicated by their number in the bottom right
hand corner of the entry.
Assign a speed dial number
1. When the telephone is idle, press MENU/SELECT.
2. Press qCID or pDIR to scroll to >Directory. Press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Speed dial. Press MENU/SELECT.
4. Press qCID or pDIR to choose your desired speed dial
location (0 or 2-9), then press MENU/SELECT. The screen
briefly shows Copy from Directory... then displays the
directory list.
5. Press qCID or pDIR to scroll to the phone number you wish
to assign to the selected speed dial location.
6. Press MENU/SELECT to save the setting and return to the
previous menu. There is a confirmation tone and the screen
returns to the speed dial list.
-OR-
1. When the telephone is idle, press and hold any dialing keys
(0 or 2-9).
2. Press qCID or pDIR to choose your desired speed dial location (0 or 2-9),
then press MENU/SELECT. The screen briefly shows Copy from Directory...
then displays the directory list.
3. Press qCID or pDIR to scroll to the phone number you wish to assign to
the selected speed dial location.
4. Press MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone and the screen returns to the speed dial list.
Assign your voicemail speed dial number
To assign your voicemail speed dial number to location 1, see page 15 or page
24. The voicemail speed dial entry does not show in the bottom right corner.
Add contact
>Speed dial
p
q
>2:Robert Brown
3:<empty>
p
q
Answering sys
>Directory
p
q
Speed dial location
Robert Brown
888-883-2445
p
q
2
Robert Brown
888-883-2445
p
q
2
Speed dial location