Answering system
87
Remote access
Cut out and carry the remote access wallet card at the back of this user’s
manual for quick reference.
NOTES:
If you do not enter a valid remote access code, the system answers the call automatically.
If you pause for more than four seconds during remote access, you hear a help menu
listing all features and commands. If there is no command for another 20 seconds, the
call ends automatically.
If the memory is full, the answering system answers after ten rings and announces,
“Memory is full. Enter the remote access code.” Enter your remote access code to access
the messages and announcements.
•
•
•
To Next Page
Loading...
Need help?
General
