Answering system
77
About the answering system
Answering system and voicemail indicators
Your telephone has separate indicators for two different types of voice 
messages: those left on its built-in digital answering system and those 
left at your telephone service provider’s voicemail (fees may apply). Your 
telephone’s built-in digital answering system messages and voicemail 
messages are separate. Each alerts you to new messages differently. 
If   and XX New messages show on the handset and 
the telephone base, there are new messages in the built-in 
answering system. To listen to messages recorded on your 
digital answering system, press  /PLAY/STOP on the 
telephone base (page 80).
If   and New voicemail display on the 
handset and the telephone base, your 
telephone service provider is indicating that 
it has new voicemail for you. To listen to your 
voicemail, you typically dial an access number 
provided by your telephone service provider, 
followed by a security code or PIN.
Some telephone service providers bundle or 
combine multiple services like voicemail and call waiting, so you may not be 
aware that you have voicemail. To check what services you have and how to 
access them, contact your telephone service provider. 
To use your voicemail service rather than your answering system, turn off 
your answering system. To use your answering system rather than your 
voicemail service, contact your telephone service provider to deactivate 
your voicemail service. 
NOTE: After reviewing all new messages, the number of old messages appears on the 
message counter.
Using the answering machine and voicemail together
You can also use your telephone answering system and voicemail together 
by setting your built-in answering system to answer before voicemail 
answers as described below. To learn how to program your voicemail 
settings, contact your telephone service provider. Then, if you are on a call, 
or if the answering system is busy recording a message and you receive 
another call, the second caller can leave a voicemail message.
Set your answering system to answer calls at least two rings earlier than 
your voicemail is set to answer. For example, if your voicemail answers 
after six rings, set your answering system to answer after four rings. 
Some voicemail providers may program the delay before answering calls 
in seconds instead of rings. In this case, allow 6 seconds per ring when 
determining the appropriate setting.
•
•
   HANDSET   1 
1 New message
10/15
10:01
AM
ANS ON