Getting started
10
Installation options
3. If necessary, bundle the
telephone cord and power
adapter cord, and secure them
with twist ties. Plug the power
adapter and telephone line into
the wall outlets.
4. Align the mounting studs on the
mounting plate with the mounting
holes on the bracket and press
the telephone base down until it
clicks securely into place.
2. Press down the switch hook and slide the handset tab upward to remove
it from the slot. Rotate the handset tab by 180 degrees. Press down the
switch hook and then replace the handset tab to its slot. The protruding
edge of the handset tab holds the corded handset in place when the
telephone is mounted on the wall.
Handset tab
Switch hook
To Next Page
Loading...
