Telephone operation
34
Volume control
Using a cordless handset:
You can set the listening volume to one of six levels. While
on a call, press qCID/VOLUME to decrease or press
pDIR/VOLUME to increase the listening volume.
Using the telephone base:
You can set the listening volume to one of eight levels.
While on a call, press qVOLUME to decrease or
VOLUMEp to increase the listening volume.
NOTES:
Handset and speakerphone volume settings are independent.
When the volume reaches the minimum or maximum setting, you hear two beeps.
Call waiting
If you subscribe to call waiting service from your telephone service provider,
you hear two beeps if someone calls while you are already on a call.
Press PHONE/FLASH on the handset or FLASH on the telephone base to
put your current call on hold and take the new call.
Press PHONE/FLASH on your handset or FLASH on the telephone base at
any time to switch back and forth between calls.
NOTE: Missed call waiting calls are not counted as missed calls.
Mute
Use the mute function to turn off the microphone. You can
hear the caller, but the caller cannot hear you.
To mute a call:
• While on a call, press MUTE/DELETE on the handset or
MUTE on the telephone base. When mute is on, the
handset or telephone base shows Muted for a few
seconds. The MUTE icon displays on the handset screen
or the MUTE button lights up on the base until you turn
it off.
To end mute a call:
• Press MUTE/DELETE or MUTE again. When mute is off,
Microphone ON appears temporarily on the handset or telephone base.
•
•
•
•
Options while on calls
To Next Page
Loading...
Need help?
General
