Telephone operation
37
Options while on calls
Blind transfer
While on an outside call, you can transfer the call to a specific device or any
device without notifying them.
To transfer an outside call from a handset:
1. During the call, press MENU/SELECT.
2. Press MENU/SELECT to choose >Transfer.
If you have one handset, the outside call is put on
hold and your handset shows Transferring call... The
telephone base rings and shows Transfer from HANDSET.
If you have more than one handset, your screen shows
TRANSFER TO: Use the dialing keys to eenter a specific
device number (0 for the telephone base, 1-9 for
handsets 1-9, TONE followed by 0-2 for handsets
10-12, or TONE followed by # for all devices), or
press qCID or pDIR to scroll to the desired device and
press MENU/SELECT. The outside call is put on hold
and your handset screen shows Transferring call... or
Transferring call to all... The other device rings and
shows Transfer from HANDSET X (HANDSET represents
the handset name, X represents the handset number).
3. To answer the call on the destination handset, press, press PHONE/FLASH
or /SPEAKERSPEAKER. To answer the call on the telephone base, lift the, lift the
corded handset or press /SPEAKERSPEAKER. The initiating handset shows
Call transferred and goes to idle mode.
•
•
>Transfer
Intercom
p
q
TRANSFER TO:
>Handset 2
p
q
Phone 0:00:12
6:30
AM
8/06
To Next Page
Loading...
