AT&T CL84102 - Dial Mode; Website

21
Telephone settings
Handset settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3. Use qCID or pDIR to scroll to >Dial mode, then press
MENU/SELECT.
4. Use qCID or pDIR to highlight >Tone or >Pulse, then press
MENU/SELECT. There is a confirmation tone and the screen
returns to the previous menu.
Website
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Website, then press
MENU/SELECT.
www.telephones.
att.com
DIAL MODE
>Tone
p
q
Home area code
>Dial mode
p
q