56
Telephone settings
Telephone base settings
Caller ID announce
The caller ID announce feature lets you know who’s calling without having to
look at the display. When you have an incoming call, the handset and/or base
speaks “Call from...” and the name of the caller based on the directory or caller
ID information. If the caller’s name is private or unknown, the phone number
up to the last 11 digits will be announced. If the caller’s phone number is also
private or unknown, no information will be announced.
To turn on or o the caller ID announce feature:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press or to scroll to the next page, and then press the Settings
smart key to enter.
Bluetooth
Set date / time
Smart key
Ringers
Settings
Access
voicemail
3. Press Caller ID announcement .
4. Select between to turn on or to turn o, and then press Yes to
conrm or press No to return to previous page.
Notes:
f To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.
f This feature does not announce information for call waiting calls.
f It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered before the
end of the second ring, the phone won’t have time to announce the caller’s information.
f Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
f Caller ID announce is available in English only.
To Next Page
Loading...
