77
Multiple handset use
Intercom
Use the intercom feature for conversations between two devices.
You can buy additional expansion handsets (AT&T model DLP70090, sold
separately) and cordless headsets for this telephone system. You can register
up to ve handsets or cordless headsets to the telephone base.
Initiate an intercom call
Using the cordless handset:
1. Press MENU/SELECT on the handset in idle mode.
2. Press CID or DIR to highlight Intercom, then press
MENU/SELECT. The screen displays Intercom to:.
3. Press CID or DIR to select a device, or use the dialing
keys to enter a device number (1-5). The handset shows
Calling HS X or Calling Base (X represents the handset
number). The destination handset rings and shows HS X is
calling.
To answer an intercom call with the cordless handset:
f Press HOME/FLASH or /SPEAKER on the handset
. Both
devices now show Intercom.
To end an intercom call with the cordless handset:
f Press
OFF/CANCEL or place the handset back in the
telephone base or charger.
Using the telephone base:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press / / / to select Intercom
MENU 1/3
Answering
system
Smart call
blocker
Phonebook Block list
Caller ID log Intercom
. The base LCD screen displays
Calling Handset X ... , while the handset screen displays Base is Calling.
3. Press Cancel to end the call.
To answer an intercom call with the telephone base:
f Press Answer
.
f Press
Silence
to mute the ringer.
Calling HS X
ECO
10:30
PM
11/20
Intercom
ECO
10:30
PM
11/20
Intercom
ECO
Handset 1
ECO
To Next Page
Loading...
