AT&T DLP73290 - Call waiting on the home line; Call waiting on the cell line

60
Telephone settings
Telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press or to scroll to the next page, and then press the Settings
smart key to enter.
MENU 2/2
Bluetooth
Set date / time
Smart key
Ringers
Settings
Access
voicemail
Previous
3. Press Dial mode .
4. Select between Touch-tone and Pulse, and then press Yes to
conrm or press No to return to previous page.
Note: If you have dial pulse (rotary) dialing service only, refer to Temporary tone dialing (page 69) to
temporarily switch from pulse to touch-tone dialing during a call.