AT&T DLP73290 - Call transfer using intercom

73
Telephone operation
Redial
4. The screen displays Enter number. Use the dialing keys to edit the number, if
necessary.
f Press CID or DIR to move the cursor to the le or right.
f Press MUTE/DELETE on the handset to erase a digit.
f Press and hold MUTE/DELETE on the handset to erase all digits.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a P appears).
5. Press MENU/SELECT.
6. The screen displays Enter name. Use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
shows on the screen (see Character chart on page 93).
f Press CID or DIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE on the handset to erase a character.
f Press and hold MUTE/DELETE on the handset to erase all characters.
7. Press MENU/SELECT. You hear a conrmation tone.
Using the telephone base:
1. Press REDIAL/PAUSE on the telephone base.
2. Press or repeatedly to browse until the desired number displays.
3. Press Save . Use the dialing keys to edit the number, if necessary.
f Press / to move the cursor to the le or right.
f Press Backspace to erase a digit.
f Press and hold Backspace to erase all digits.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a P appears).
5. Press Next to proceed to enter name.
6. Use the dialing keys to enter a name (up to 15 characters). Press a key
repeatedly until the desired character shows on the screen (see Character
chart on page 93).
f Press / to move the cursor to the le or right.
f Press 0 to add a space.
f Press Backspace to erase a digit.
f Press and hold Backspace to erase all digits.