AT&T EL52501 - Battery Installation and Charging; Battery Installation

Getting started
5
Battery installation and charging
Battery installation
Install the battery as shown below.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,
visit our website at www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Battery
Pack
BT1
62342/BT26234
2
2.4V 300mA
h Ni-MH
WAR
NING:DO NOT
BURN OR
PUNCTURE B
ATTERIES
MADE IN
CHINA
CR0920
Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
1. Insert the supplied
battery with the label
THIS SIDE UP facing
up as indicated.
2. Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.
3.
Charge the handset by placing it
face up in the telephone base or
charger. The CHARGE light is on
when charging.
4.
To replace the battery, press
the tab and slide the battery
compartment cover downwards.
Lift out the old battery and
disconnect it from the handset.
Follow the instructions above to
install and charge the new battery.
CHARGE light