AT&T EL52501 - Telephone Operation; Making, Answering and Ending Calls; Making a Call; Temporary Ringer Silencing

16
Making, answering and ending calls
Making a call
To make a call:
Press PHONE/FLASH, then wait for a dial tone.
-OR-
Press /SPEAKER to use the speakerphone, then
wait for a dial tone.
Use the dialing keys to enter the telephone number.
On-hook dialing (predialing):
Use the dialing keys to enter the telephone number
(up to 30 digits).
Press and hold REDIAL/PAUSE to insert a 3-second
dialing pause (a P appears).
Press MUTE/DELETE or OFF/CANCEL to erase digits.
Press PHONE/FLASH to call.
-OR-
Press /SPEAKER to call using the speakerphone.
-OR-
Press and hold OFF/CANCEL to return to idle mode.
NOTES:
Pressing PHONE/FLASH to access services from your telephone service provider does not
affect the elapsed time.
When a handset is on a call, if another handset attempts to access the directory, speed dial
list or caller ID history, the screen shows NOT AVAILABLE AT THIS TIME.
Temporary ringer silencing
To silence the ringer temporarily on that handset only:
While the telephone is ringing, press OFF/CANCEL or
MUTE/DELETE.
To silence the ringer temporarily on the telephone base:
While the telephone is ringing, press /-VOLUME on the
telephone base.
This turns off the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume.
NOTE: Unless the ringer volume is turned off on that handset, each handset rings when there
is an incoming call.
1.
2.
1.
•
•
2.
•
•
•
•
The screen displays the
elapsed time as you
talk (in hours, minutes and
seconds).
10:30
PM
11/20
PHONE 0:01:30
888-722-7702
888-722-7702
RINGER MUTED
Telephone operation