AT&T EL52501 - Create Directory Entries; Add a New Contact

27
Directory
Create directory entries
Add a new contact
Press MENU/SELECT in idle mode.
Press CID or DIR to scroll to >DIRECTORY, then press MENU/SELECT.
Press CID or DIR to scroll to >ADD CONTACT, then press MENU/SELECT.
Enter the telephone number when prompted.
Copy a number from redial:
Press REDIAL/PAUSE.
Press CID or DIR, or press REDIAL/PAUSE
repeatedly to locate the number to copy.
Press MENU/SELECT to copy the number.
-OR-
Use the dialing keys to enter a number (up to 30 digits).
Press CID or DIR to move the cursor to the left or right.
Press and hold REDIAL/PAUSE to enter a 3-second dialing pause
(a P appears).
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press MENU/SELECT to save the number in the display.
Enter the name when prompted. Use the dialing keys and refer to
Character chart on page 28 to enter a name (up to 15 characters). Each
time you press a key, the character on that key appears. Additional key
presses produce other characters on that key.
Press 0 to add a space.
Press CID or DIR to move the cursor to the left
or right.
Press MUTE/DELETE to erase a character.
Press and hold MUTE/DELETE to erase all characters.
The first letter or every word is capitalized. The remaining letters in a
word start as lower case letters as shown in the character chart on the
next page.
1.
2.
3.
4.
•
a.
b.
c.
•
–
–
–
–
5.
6.
•
•
•
•
•
ENTER NUMBER
888-883-2445_
ENTER NAME
Charlie Johnson_