15
Telephone settings
Telephone base ringer volume
When the telephone base is not in use, press
/ /-VOLUME+ on the telephone base to set the
ringer volume level (1-6), or turn the ringer off. A
sample of the ringer sounds as you adjust the volume.
The telephone base announces, “Base ringer is off”
when you set the volume to 0.
NOTE: If a handset is on an outside call, the telephone base
volume cannot be changed.
Answering system settings
Go to Answering system settings starting on page 39 for instructions on how
to use a handset to modify the answering system settings shown below.
Setting Page(s)
Announcement (record, play and delete) 39-40
Answer on/off 40
Call screening 41
Number of rings 41
Remote access code 42
Message alert tone 42
Recording time 43
To Next Page
Loading...
