AT&T EL52501 - Redial; View Numbers in the Redial List; Call a Number from the Redial List

18
Telephone operation
Redial
Each handset stores the 10 most recently called numbers in the redial list.
View numbers in the redial list
Press REDIAL/PAUSE in idle mode.
Press REDIAL/PAUSE. Press DIR, CID or REDIAL/PAUSE
repeatedly to scroll through the 10 most recently called
numbers (up to 30 digits each). The handset beeps twice
at the beginning or end of the list.
Press OFF/CANCEL to exit the redial list.
NOTE: If you access an empty redial list, the handset sounds an error tone.
Call a number from the redial list
Follow Steps 1 and 2 above and when the number you
want to call is displayed, press PHONE/FLASH or
/SPEAKER to dial.
-OR-
Press PHONE/FLASH or /SPEAKER and then wait for
a dial tone.
Press REDIAL/PAUSE. Press DIR, CID or
REDIAL/PAUSE repeatedly until the number you want
to call is displayed.
Press MENU/SELECT. The handset dials the desired number.
NOTE: If you press REDIAL/PAUSE when the redial list is empty, the
handset sounds an error tone.
1.
2.
3.
•
1.
2.
3.
REDIAL
888-722-7702