15
Getting startedGetting started
Belt clip & optional headset
Install belt clip as shown below, if desired.
For handsfree headset conversations, use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm headset.
To purchase a headset, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Snap the belt
clip into the
notches on
both sides of
the handset.
Plug a 2.5 mm
headset into the
jack on the side of
the handset.
To release the belt clip from
the handset, press on both
flaps of the belt clip (as
shown).
Pull and unlock one flap
from the notch first before
detaching the whole belt
clip from handset.
Lift the rubber
flap here.
Side of the
handset
To Next Page
Loading...
