22
Bluetooth
Bluetooth Setup
To use a Bluetooth enabled cellular phone or
headset with your EP5632/EP5632-2, you must
first pair and connect your Bluetooth device(s)
with the telephone base. In then the Bluetooth Setup
section, you can setup a cellular phone (page 23)
and headset (page 24). InIn Managing your Devices
section, you can view and modify the information
about your Bluetooth device(s) (page 25).
To enter the Bluetooth menu:
1. Press the MENU softkey on the telephone base
while in idle mode.
2. Press the UP and DOWN Navkeys to highlight to highlightto highlight
Bluetooth, then press the SELECT softkey. You
can then select:
• Set up Cellular - set up a Bluetooth enabled
cellular phone (page 23).
• Set up Headset - set up a Bluetooth
enabled headset (page 24).
• Active Devices - replace, remove, view
the current status of, and connect to your
paired Bluetooth device(s) (page 27).
• Paired Devices - rename, delete, and view
information about your paired devices
(page 25).
• Change PIN - change the PIN of the
telephone base (page 29).
While in the Bluetooth menu:
• Press CANCEL to return to a previous menu.
• Press and hold CANCEL on the telephone base
to return to the idle screen.
See the Troubleshooting section on page 92 if you
experience difficulty pairing or connecting your
Bluetooth device(s).
NOTE: To learn
how to operate your
Bluetooth devices with
the telephone base, see
the Telephone operation
section (page 55).
12:00 AM
REDIAL
MENU
CID
Main Menu
Directory
Call Log
Answering System
Select
Main Menu
Call Log
Answering System
Bluetooth
Select
Bluetooth
Set up Cellular
Set up Headset
Active Devices
Select
To Next Page
Loading...
Need help?
General
