45
System setup
Default Settings (restore settings)
You can restore the factory-set default settings of
the telephone base if desired. Restoring the default
settings only affect the telephone base.
To restore default settings:
1. Press the MENU softkey in idle mode to enter
the main menu.
2. Press the UP and DOWN NavKeys to select
Settings, then press SELECT softkey to enter the
Settings menu.
3. Press the UP and DOWN NavKeys to highlight
Default Settings, then press SELECT. The screen
will display Restore Default Settings?
4. Press the YES softkey to restore the telephone
base default settings.
NOTE: Restoring the base default settings does not clear
the directory, call log, answering system messages, active
devices, paired devices, redial list, or reset the time.
Delete Handsets
For your handset(s) to be numbered sequentially,
you need to delete all the handset registrations
from the telephone base. After you delete all the
handset registrations, you will need to individually
register each handset with the telephone base
(see page 17).
To delete all the handset registrations:
1. Press the MENU softkey on the telephone base
in idle mode to enter to the main menu.
2. Press the UP and DOWN NavKeys to select
Settings, then press SELECT softkey to enter
the Settings menu.
3. Press the UP and DOWN NavKeys to highlight
Delete Handsets, then press the SELECT softkey.
The screen will show Delete Registration of all
handsets?
4. Press the YES softkey.
After deleting the registrations of all handsets, see
page 17 for handset registration instructions.
Settings
LCD Contrast
Clear Voice Mail
Default Settings
SElect
Default Settings
Restore Default
Settings?
YES No
Settings
Clear Voice Mail
Default Settings
Delete Handsets
SElect
Delete Handsets
Delete Registration
of all handsets?
YES No
NOTE: If you replace
a handset, the new
handset will be assigned
the next available
registration number,
rather than the handset
number of the handset
that you are replacing.
To Next Page
Loading...
Need help?
General
