27
Bluetooth
NOTE: Connected
devices appear on the
Active Devices list
automatically.
Active Devices
Only devices on the Active Devices list can establish
a Bluetooth connection with the telephone base.
Although two paired devices can be connected to
the telephone base, only one Bluetooth cellular
phone or headset can be on a call at a time.
To enter the Active Devices list:
1. Press the MENU softkey on the telephone base
while in idle mode.
2. Press the UP and DOWN NavKeys
to highlight
Bluetooth, then press the SELECT softkey to enter
the Bluetooth menu.
3. Press the DOWN NavKey to highlight Active
Devices, then press the SELECT softkey.
In the Active Devices list, you may see the following
status symbols:
• X in front of the device it means that it is
disconnected.
•
P
in front of a device it indicates that it is
connected to the telephone base.
• ))) in front of a device indicates that the
telephone base is trying to connect to that
device.
While in the Active Devices list, you can select:
• CONNECT - press the CONNECT softkey to
connect to a disconnected device.
• DISCONN - press the DISCONN softkey to
disconnect a device.
• INFO - press the INFO softkey to view the
current status and full bluetooth device name
of a device.
• OPTIONS - press the OPTIONS softkey to
replace or remove a device.
If you experience difficulty using your Bluetooth
device(s), make sure that the device is on and notmake sure that the device is on and not
connected to any other Bluetooth device. See the
Troubleshooting section for more information
(page 92).
Main Menu
Call Log
Answering System
Bluetooth
Select
Select
Bluetooth
Set up Cellular
Set up Headset
Active Devices
12:00 AM
REDIAL
MENU
CID
Active Devices
X 1 My Headset
P2 John's Cell
Connect
INFO
OPTIONS
To Next Page
Loading...
Need help?
General
