AT&T Four-Line Intercom Speakerphone 974 - Set this Phone to be the Centrex Console Phone

You will need to program the next two features if
this phone is the designated Console Phone for
your Centrex system.
Set This Phone to be the Centrex
Console Phone
¥
NOTE: This feature is for use with Centrex
systems only.
1 Press E to begin feature setup.
2 Press - until the screen display includes
CENTREX.
3 Press E. The screen display includes
CONSOLE and the current setting.
4 Press < or > to toggle between On and Off.
5 Press - to save your choice. The screen display
includes CSL DELAY RING.
6 Proceed to Step 5 of “Set the Centrex Console
Delayed Ring Time” on page 42 to change the
next feature (Console Delay Ring)
— OR —
Press and hold E to return to the idle
screen.
¥
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
41
FEATURE SETUP
FEATURE SETUP
i
ii
ii
k
k
k
o
o
o
n
nn
nn
974_CIB_1ATT_033104 3/31/2004 5:28 PM Page 41