124
Appendix
Add and register handsets/headsets
If registration fails, the system will automatically try to register again. If
registration fails aer the third try, Registration failed appears on the handset
screen. The handset shows To register HS... and ...see manual alternately and
the telephone base returns to idle mode. This may take up to ve minutes to
occur. Please start again from Step 1.
Notes:
f You cannot register a handset if any other system handset is in use.
f If you try to register more than ve handsets to the telephone base, the telephone base shows Registration slots
are full and sounds two beeps..
To Next Page
Loading...
