29
Bluetooth
Remote voice control
Activate remote voice control
1. Press CALL BLOCK/VOICE on the handset when in idle.
f If you have connected one cell phone to the
telephone, the handset shows the device name
of the connected cell phone directly.
f If you have connected two cell phones to
the telephone, the handset shows Select a
device, followed by the device name list of the
connected cell phones. Scroll to choose the
desired cell phone, and then press MENU/SELECT.
f If there is no cell phone paired to the system, the
handset displays Pair cell rst and then returns
to the previous menu.
2. The handset then shows the remote voice control icon .
f If the activation fails, the handset displays Not available. When the screen
returns to idle, try Step 1 again.
3. When the handset plays the conrmation tone as forwarded by the cell
phone’s voice app, start speaking toward the handset, and then wait for
feedback. Make reply to the voice app’s feedback, if necessary.
f You can press on the handset to turn o the speakerphone and listen
to the feedback through the handset earpiece.
4. To end the current remote voice control session, press OFF/CANCEL on
the handset. You can restart by following Steps 1-3 mentioned above.
To Next Page
Loading...
