AT&T GL2113-31 - Page 79

73
Caller ID
Caller ID operation
Save a caller ID log entry to the block list
1. Select a desired entry in the caller ID log (see Review the caller ID log on
page 69).
2. When the desired entry appears, press MENU/SELECT ..
3. Press CID or to highlight To Block list, and then press
MENU/SELECT .. The screen displays Enter number.
4. Use the dialing keys to edit the number, if necessary.
f Press CID or to move the cursor to the left or right.
f Press MUTE/DELETE on the handset to backspace and
erase a digit.
f Press and hold MUTE/DELETE on the handset to erase the entire entry.
f Press and hold REDIAL/PAUSE to insert a dialing pause (a P appears).
5. Press MENU/SELECT .. The handset displays Enter name.
6. Use the dialing keys to edit the name.
f Press CID or to move the cursor to the left or right.
f Press 0 to add a space.
f Press MUTE/DELETE on the handset to erase a character.
f Press and hold MUTE/DELETE on the handset to erase all characters.
f Press TONE to change the next letter to upper or lower case.
7. Press MENU/SELECT to conrm. You hear a conrmation tone.
To Block list
ECO