50
2. Select Yes to Enable IPv4 DMZ.
3. Enter the IP address of the device you want exposed.
4. Click Save .
Note: To avoid the possibility of the IP address changing, making it
unreachable, it’s recommended to assign a static IP address to the
intended device.
UPnP
UPnP (Universal Plug and Play) allows devices to auto discover each other
without having to create networking configurations.
Some common uses include:
• Smart speakers with digital assistants
• Home automation devices
• Security cameras and other sensors
UPnP should be enabled only when necessary and only trusted devices
should be allowed to connect to the network.
1. From the Dashboard , click NAT Forwarding then click UPnP.
2. Select Yes to Enable UPnP.
Note: Additional protective measures such as anti-virus software are
recommended as applicable.
Setting Description
Advertisement Period
Defines the number of minutes the 5G
Gateway broadcasts UPnP information.
To Next Page
Loading...
