51
Advertisement Time to Live
Defines the maximum number of hops
each packet can travel before timing out.
ALG
ALG (Application Layer Gateway) allows dynamic TCP/UDP ports to
communicate with known ports used to support underlying protocols such
as VPN, FTP and VoIP services.
If you are using applications that require these protocols, you may need to
enable the below for an optimal experience.
1. From the Dashboard , click NAT Forwarding then click ALG.
2. Enable or disable the following by sliding the switch to the On or Off
position:
• PPTP Passthrough
• L2TP Passthrough
• IPSec Passthrough
• SSL Passthrough
• RTSP Passthrough
• H.323 Passthrough
• SIP Passthrough
Virtual Servers
Virtual servers allow incoming network traffic on a specific port to be
forwarded to a designated device on your network. This is commonly used
for security cameras, home automation, and other IoT devices.
Note: Port forwarding is not recommended without careful consideration
and additional protective measures in place.
To Next Page
Loading...
