10
Getting started
Battery charging
After installing the battery, charge the headset by placing it in
the headset base as shown below. The headset ON/OFF light is
on when the headset is charging.
CAUTION:
There may be a risk of detonation if you use a wrong type
of battery. Use only the supplied rechargeable battery or
replacement battery (model BT191545 “BYD SL531732”). To
order, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
1. Insert the headset into
the charging cradle.
2. Push the headset downward
until the ON/OFF light on
the headset turns on.
Insert
Push
ON/OFF light
To Next Page
Loading...
Need help?
General
