AT&T TL 7610 - Switch a Call between a Handset and Headset

33
Operation
Options while on calls
Switch a call between a handset and headset
When the headset base is plugged into the telephone wall jack
(installation option 1 or 2):
To switch from the corded handset to a headset while on a
call, press ON/OFF on the headset, then place the corded
handset back into the telephone base.
To switch from a headset to the corded handset while on a
call, lift the corded handset from the telephone base, then
press ON/OFF on the headset.
To switch from a cordless handset to a headset while on
a call, press ON/OFF on the headset, then hang up the
cordless handset.
To switch from a headset to a cordless handset while on a call,
press the button you use to answer a call, then press ON/OFF
on the headset.
When the headset base is connected to a multiple line or
digital business corded telephone (installation option 3):
To switch between a headset and the corded handset while on a
call, press ON/OFF on the headset.
•
•
•
•