AT&T TL96273 - Set date and time

28
Telephone settings
Handset and telephone base settings
Key tone
The telephone base and handset is set to beep with each key press. If you turn
off the key tone, there are no beeps when you press keys.
Press MENU in idle mode to enter the main menu.
Use CID or DIR on the handset, or press CID or DIR on the telephone
base to scroll to Settings, then press SELECT .
Press CID or DIR on the handset, or press CID or DIR on the
telephone base to scroll to Key tone, then press SELECT .
Press CID or DIR on the handset, or press CID or DIR on the
telephone base to select the desired volume or off. Press SET to save your
preference.
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To change the setting:
Press MENU in idle mode to enter the main menu.
Press CID or DIR on the handset, or press CID or DIR on the
telephone base to highlight Settings, then press SELECT .
Press CID or DIR on the handset, or press CID or DIR on the
telephone base to highlight Dial mode, then press SELECT .
Press CID or DIR on the handset, or press CID or DIR on the
telephone base to choose Tone or Pulse, then press SET to save.
1.
2.
3.
4.
1.
2.
3.
4.