AT&T TL96273 - Make, Answer or End a Cell Call

34
Telephone operation
Make, answer and end a call
Make, answer or end a cell call
The TL96273/TL96373/TL96473/TL96323 can be used to make or answer
calls on the cell line. You can connect a maximum of 2 Bluetooth enabled cell
phones to the telephone base, and both cell phones can be used on cell calls
at a time.
Using a handset:
To make a cell call:
Press
CELL 1 or CELL 2. Enter the telephone number, then press DIAL .
To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2.
If you have only one cell phone connected to the telephone base, it is
automatically selected to make cell calls. If you have two cell phones connected
to the telephone base, the telephone system prompts you to select a cell phone
before you make a cell call.
To answer a cell call:
Press CELL 1 or CELL 2.
To end a cell call:
Press OFF/CANCEL, or put the handset in the telephone base or charger.
NOTES:
You can also use your cell phone to answer the call.
If you do not want to answer the call, press
REJECT . The screen displays Call rejected
and then returns to the idle mode.
When you try to make a cell call but your cell phone is not connected to the base, the
handset displays No cellular is ready for connection. Press
CONNECT to connect your
cell phone to the telephone system. Refer to Bluetooth connection from idle mode on
page 17 and Connect/disconnect an active device on page 18.
•
•
•
•
•
•
•