AT&T TL96273 - Change a One-To-One PTT Call to an Intercom Call

59
Multiple handset
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT conversation to an intercom call.
Using a handset:
When your handset displays Press and hold [PTT] to talk, press
INTCOM .
Your handset displays Switch to Intercom? Press SELECT to confirm.
Your handset then displays Calling HANDSET Y (Y represents the
destination handset number) or Calling BASE 0. The destination
handset temporarily displays Push to talk Ended and then
HANDSET X is calling (X represents the originating handset
number).
On the destination device, press HOME/FLASH or /SPEAKER on the
handset or HOME on the telephone base to answer the intercom call. Both
devices now display Intercom.
To end the intercom call, press OFF/CANCEL, END or place the handset in
the telephone base or charger. Both devices display Intercom ended.
Using the telephone base:
When the telephone base displays Press and hold [PTT] to talk, press
INTCOM . The telephone base displays Switch to Intercom? Press SELECT .
The telephone base then displays Calling HANDSET Y
(Y represents the destination handset number). The
destination handset temporarily displays Push to talk Ended
and then BASE 0 is calling.
On the destination handset, press HOME/FLASH or /SPEAKER to answer
the intercom call. Both screens now display Intercom.
To end the intercom call, press CANCEL or END on the telephone base. Both
screens display Intercom ended.
1.
•
2.
3.
1.
•
2.
3.