AT&T TL96273 - Page 53

47
Multiple handset
Intercom
Using the telephone base:
Press MENU on the telephone base in idle mode.
Press CID
or DIR to highlight Intercom, then
press SELECT .
The telephone base displays INTERCOM and a list of
registered handsets.
Press
CID or DIR to highlight a destination handset or All handsets,
and then press SELECT .
-OR-
Press 1-9 for handset 1-9, TONE and 0 for handset 10, TONE and 1
for handset 11, or TONE and 2 for handset 12.
-OR-
Press TONE and then # (pound key) to call all handsets.
The telephone base displays Calling HANDSET X, or Calling all handsets. The
destination handset(s) rings and displays BASE 0 is calling.
To answer an intercom call at the destination device:
Press HOME/FLASH or /SPEAKER on the destination handset, or press
HOME on the telephone base. Both screens show Intercom.
To silence an intercom call:
Press OFF/CANCEL, MUTE/DELETE or SILENCE on the destination handset,
or press MUTE or SILENCE on the telephone base. The screen displays
Ringer muted for a few seconds.
To mute while on an intercom call:
Press MUTE/DELETE on the handset, or MUTE on the telephone base. The
screen displays Microphone off for a few seconds.
1.
2.
•
–
–
–
•
•
•