98
Answering system
Answering system settings
To record a new outgoing announcement:
Using a cordless handset or the telephone base:
Press MENU in idle mode.
Press CID or DIR to scroll to Answering sys, then press
SELECT .
Press SELECT again to select Announcement.
Press SELECT to select Record annc. The system
announces, “Record after the tone. Press STOP when you
are done.”
After the tone, speak towards the microphone of the
cordless handset. Press STOP to end recording.
The newly recorded announcement automatically plays. Press STOP to stop
the playback at any time, or RECORD to record again if desired.
To listen to the recorded announcement again, wait after playback is completed,
then scroll to Play annc and press SELECT.
NOTES:
Your announcement can be up to 90 seconds in length.
Announcements shorter than two seconds are not recorded.
1.
2.
3.
4.
5.
6.
•
•
Recording
announcement...
STOP
Playing
announcement...
RECORD
STOP
To Next Page
Loading...
