12
Getting started
Installation options
Your telephone base is ready for tabletop use. If you want to mount your
telephone on a wall, use the provided wall mount bracket to attach to a standard
dual-stud telephone wall mounting plate. If you do not have this wall mounting
plate, you can purchase one from many hardware or consumer electronics
retailers. You may need a professional to install the wall mounting plate.
Tabletop to wall mount installation
Unplug the power adapter from the power outlet. Unplug the telephone
line cord from the wall jack (or DSL filter).
Press down on the tabs of the wall mount bracket as indicated to release it
from tabletop orientation.
Rotate the wall mount bracket down and push it into the telephone base
until it clicks into place.
Plug the telephone line cord (or DSL filter) into the wall jack. Plug the
power adapter into a power outlet not controlled by a wall switch. Align
the slots on the back of the telephone base with the studs of the wall
mounting plate.
Slide the telephone base down until it locks securely. Bundle the telephone
line cord and power adapter cord neatly with twist ties.
1.
2.
3.
4.
5.
3
5
2
4
1
To Next Page
Loading...
