63
Intercom
Use the intercom feature for conversations between two handsets, or a handset
and the telephone base.
You can buy additional expansion handsets (AT&T model TL90073, sold
separately) for this telephone system. You can register up to 12 handsets to the
telephone base.
To initiate an intercom call
Using a cordless handset:
Press MENU in idle mode.
Press CID or DIR to highlight Intercom, then press
SELECT .
If you have one handset, your handset displays Calling
base. The destination handset rings and displays
HANDSET is calling.
If you have more than one handset, your handset
displays INTERCOM TO: and a list of registered
devices.
Press CID or DIR to select a destination device and then press
SELECT. Your handset displays Calling HANDSET X, Calling BASE 0
or Calling all when you choose All.
-OR-
Press 1-9 for HANDSET 1-9, TONE and 0 for HANDSET 10,
TONE and 1 for HANDSET 11 or TONE and 2 for HANDSET 12.
Your handset displays Calling HANDSET X. The other handset rings
and displays HANDSET X is calling.
-OR-
Press TONE and then # (pound key) to call all handsets.
The destination device(s) rings and displays HANDSET X is calling, or
HANDSET X is calling all when you choose all handsets (HANDSET
represents the handset name, X represents the handset number).
1.
2.
•
•
•
•
•
Multiple handset
Answering sys
Directory
Caller ID log
Intercom
BACK
SELECT
INTERCOM
HANDSET 2
HANDSET 3
All
BACK
SELECT
To Next Page
Loading...
