AT&T TL96273 - Page 70

64
Multiple handset
Intercom
Using the telephone base:
Press MENU in idle mode.
Press CID or DIR to highlight Intercom, then press SELECT.
If you have one handset, your telephone base displays Calling
HANDSET X. The destination handset rings and displays Base is calling.
If you have more than one handset, your handset displays INTERCOM
TO and a list of registered handsets.
Press CID or DIR to select a destination handset and then press
SELECT. Your handset displays Calling HANDSET X, or Calling all
when you choose All.
-OR-
Press 1-9 for HANDSET 1-9, TONE and 0 for HANDSET 10,
TONE and 1 for HANDSET 11 or TONE and 2 for HANDSET 12.
Your handset displays Calling HANDSET X. The other handset rings
and displays HANDSET X is calling.
-OR-
Press TONE and then # (pound key) to call all handsets.
The destination handset(s) rings and displays BASE 0 is calling,
or BASE 0 is calling all when you choose all handsets (HANDSET
represents the handset name, X represents the handset number).
To answer an intercom call at the destination device:
Using a cordless handset:
Press HOME/FLASH, /SPEAKER, CELL 1, CELL 2 or any dialing key
(0-9 or TONE ) . Both devices show Intercom.
Using the telephone base:
Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE ) . Both
devices show Intercom.
1.
2.
•
•
•
•
•