AT&T TL96273 - Wall Mount to Tabletop Installation

13
Getting started
Installation options
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop
position, follow the steps below.
If the telephone line cord and power adapter cord are bundled, untie
them first. Push the telephone base up to remove it from wall. Unplug the
telephone line cord (or DSL filter) from the wall. Unplug the power adapter
from the power outlet.
Swivel the wall mount bracket up to tabletop position and then push it into
the telephone base until it clicks into place.
Plug the telephone line cord (or DSL filter) into the wall jack. Plug the
power adapter into a power outlet not controlled by a wall switch. Bundle
the telephone line cord and power adapter cord neatly with twist ties
if necessary.
1.
2.
3.
1
3
2