AT&T TL96547 - Message Recording Time

149
Answering system
Answering system settings
Message recording time
You can set the recording time limit for each incoming message. The default
setting is three minutes.
To set the message recording time:
1. Press MENU in idle mode.
2. Press CID or DIR to highlight Answering sys, then press
SELECT .
3. Press CID or DIR to highlight Ans sys setup, then press
SELECT .
4. Press CID or DIR to highlight Recording time, then press
SELECT .
5. Press CID or DIR to choose 3 minutes, 2 minutes, or
1 minute, then press SELECT. Youhearaconrmationtone.
ANSWERING SYS
Remote code
Msg alert tone
Recording time
BACK SELECT
RECORDING TIME
3 minutes
2 minutes
1 minute
BACK SELECT
ANS SYS SETUP
Remote code
Msg alert tone
Recording time
BACK SELECT
RECORDING TIME
3 minutes
2 minutes
1 minute
BACK SELECT