AT&T TL96547 - Cell Area Code

48
Telephone settings
Handset and telephone base settings
Cell area code
Most cell phone entries are stored in a 10-digit format. If all of your cell phone
entries are stored this way, you do not need to program your cell area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be dialed
correctly using your home line.
To set the cell area code:
1. Press MENU in idle mode.
2. Press CID or DIR to highlight Directory, then press SELECT.
3. Press CID or DIR to highlight a desired downloaded directory, then
press OPTION.
4. Press SELECT to choose Cell area code.Thescreenbriey
shows Only for 7 digits dialing from Caller ID log.
5. Use the dialing keys to enter the desired cell area code.
f Press CID or DIR tomovethecursortotheleor
right.
f Press MUTE/DELETE or BACKSP on the handset, or
press X/DELETE on the telephone base to erase a
digit.
f Press and hold MUTE/DELETE on the handset, or
press and hold X/DELETE on the telephone base to erase all digits.
6. Press SAVEtoconrm.Youhearaconrmationtoneandthescreenshows
Area code will not show in Caller ID logbrieybeforereturningtothe
previous menu.
CELL AREA CODE
---
BACKSP SAVE
CELL AREA CODE
---
---
BACKSP SAVE