AT&T TL96547 - Answer a PTT Call

83
Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
f PTT From HANDSET X To devices: X(therstX represents the initiating
handset number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
f PTT From Base 0 To devices: X (the X represents your handset number;
a maximum of four handset numbers appear).
3. Whenyourspeakerphonelightiso(thescreenshowsPress and hold [PTT]
to talk), press and hold PUSH TO TALK on your handset or PT T/FLASH on
your telephone base. You will hear a chirp. Speak towards the device.
f While you are speaking, your device shows PTT To BASE 0 or PTT to
HANDSET X (X represents the destination handset number) or PTT
To devices: X (X represents the handset numbers of one or more
destination handsets; a maximum of four handset numbers appear).
f Your voice is broadcast to all destination devices.
Aerspeaking,releasePUSH TO TALK on your handset or PT T/FLASH
onyourtelephonebase.Yourdevicewillbeep.Aerthebeep,ifyour
speakerphonelightiso,youcanpress and hold PUSH TO TALK on your
handset or PTT/FLASH on your telephone base to continue speaking, or the
destination device can respond.