63
Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID log or redial list while you are on a call.
Chain dialing is useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
Using a handset:
To access a number in the directory while on a call:
1. Press OPTION .
2. Press CID or DIR to highlight Directory, then press SELECT .
3. Press CID or DIR to highlight the desired directory, then press REVIEW .
4. Press CID or DIR to scroll to the desired entry or perform an alphabetical
search (page 125).
5. Press DIAL to dial the displayed number.
To access a number in the caller ID log while on a call:
1. Press OPTION .
2. Press CID or DIR to highlight Caller ID log, then press SELECT .
3. Press CID or DIR to scroll to the desired entry.
4. Press CALL to dial the displayed number.
To access the redial list while on a call:
1. Press REDIAL/PAUSE.
2. Press CID, DIR, or REDIAL/PAUSE until the desired number displays.
3. Press DIAL to dial the displayed number.
To Next Page
Loading...
