AT&T TL96547 - Delete a Redial Entry

68
Telephone operation
Redial
Using the telephone base:
1. Press REDIAL/PAUSE in idle mode.
2. Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays.
3. Press SAVE.
4. The screen displays EDIT NUMBER. Use the dialing keys to edit the number, if
necessary.
f Press CID or DIRtomovethecursortotheleorright.
f Press BACKSP or X/DELETE to erase a digit.
f Press and hold X/DELETE to erase all digits.
f Press and hold REDIAL/PAUSE to insert a three-second dialing pause
(a p appears).
5. Press NEXT.
6. The screen displays SELECT LABEL. Press CID or DIR to select one of the
following labels, and then press NEXT.
f Home
f Cell
f Work
f Other
7. The screen displays ENTER NAME. Use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
shows on the screen (see Character chart on page 89).
f Press CID or DIRtomovethecursortotheleorright.
f Press 0 to add a space.
f Press BACKSP or MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press a>A to change the next letter to upper or lower case.
8. Press SAVE and then Saved to directorydisplays.Youhearaconrmationtone.
Delete a redial entry
1. Press REDIAL/PAUSE in idle mode.
2. Press CID, DIR or REDIAL/PAUSE repeatedly to browse until the desired
number displays.
3. Press MUTE/DELETE on the handset or X/DELETE on the telephone base to
deletethedisplayednumber.Youhearaconrmationtone.