VERIFY
OS
ROM
0
Purpose:
To
test
the OS
ROM
(A8)
for proper functioning.
0
Procedure: Press key
8
followed
by
START.
0
Format:
If
error code
30
appears
on
the Error Summary (Figure
3-1,
pg.
3-8)
the
OS
ROM
chip is defective. Replace the defective chip and
restart the
test.
No Flowchart Entry Point.
TONE
TEST
a
Purpose: To check the audio generation section of the
POKEY
(A7).
a
Procedure: Press
key
6
followed
by
START.
0
Format: The screen prints at the bottom:
Register
(1
to
4)
?
Press
key
1
followed by START. A series of eight tones sounds
on
each register.
The first two tones may be inaudible but you can hear the speaker click.
Repeat for registers
2,3,4.
Diagnostic Flowchart Entry Point:
Pg.
4A-17.
CX5200
Field Service Manual
Changed
by
ECN
/I0036
6/21/83
,