SMART TDS & BOTTOM BLOWDOWN CONTROLLER
5.2.9 Tests outputs (Alarm and Valves)
This function is used to test the Conductivity Blowdown Control Valve BCV 900,
Bottom Blowdown Control Valve BCV 700 and the alarm function working properly.
With this function, can be test to open or close the
Conductivity Blowdown Control Valve.
Conductivity Blowdown Control valve will be open for
2 minutes. Before the test duration is finished, when
button is pressed the valve will be closed.
With this function, can be test to open or close the
Bottom Blowdown Control Valve.
The valve will be open for 5 seconds.
With this function alarm can be testted
and energises alarm relay manually for 5 second.
To Next Page
Loading...
