To our customers
1.Dear customers, please read this manual carefully before you install the product, otherwise
it may lead to damage to the heat pump or may injure operators as well as cause financial loss.
2.With the development of science and technology, the product will be improved as well,
so you are invited to keep up with the latest products.
3.If you need any further technical information, please contact our local distributor.
4.Attention:
4.1 Before install the heat pump, please check whether the local power supply corresponds with
the requirement of the heat pump.
For details, refer to the label on the unit or performance data in this manual.
4.2 Please install the electrical protection devices, according to the local regulations.
4.3 Connecting the heat pump to a ground wire is necessary, in order to prevent electrical shock caused
by an unexpected short circuit inside the unit.
4.4 An electrical wiring diagram is provided in this manual.
4.5 For safety reasons, please do not change or repair the heat pump by yourself. If it is necessary,
please contact your local distributor for help.
4.6 Do not put any objects into the heat pump when running. It may touch the fan and
damage it or lead to accidents(especially for the children).
4.7 Do not use the heat pump without the grid or plate work since it may lead to accidents
or abnormal operation of the unit.
4.8 If the unit is soaked in water, please contact our local distributor immediately.
The unit can only be restarted after a completed inspection by professional technicians.
4.9 Unqualified technicians are not allowed to adjust any switches, valves or controllers in the unit.
SWIMMING POOL HEAT PUMP
SWIMMING POOL HEAT PUMP
To Next Page
Loading...