2. Installation of the heat pump unit
5
SWIMMING POOL HEAT PUMP
SWIMMING POOL HEAT PUMP
Vertical series
WBR-21.0H-A-S
WBR-26.0H-A-S
105955 660
370
660
D
G
E
105
HF
WBR-9.5H-A
WBR-11.5H-A
WBR-12.5H-A
WBR-14.0H-A
WBR-17.0H-A
WBR-17.0H-A-S
WBR-14.0H-A-S
Unit：mm
660
370
660855
Unit Model
Size
2.1 Remarks
The factory only provides the heat pump unit;the other parts, including a contingent by- pass, are to be
provided by the user or the installer.
Attention:
Please take the following steps when installing the heat pump:
1. Each addition of chemicals has to be performed through the conduits located downstream of the heat pump.
2. Install a by-pass when the flow of the pool pump exceeds the authorized flow through the heat
exchanger of the heat pump with 20%.
3. Always place the heat pump on a solid base and use the supplied silent blocks in order to avoid
vibrations and noise.
4. Always keep the heat pump in upright position. If the unit has been tilted, you should wait for at least
24 hours before turning it on .
2.2 Dimensions for Swimming Pool Heat Pump Unit- Monobloc
D
H
G
F
E
To Next Page
Loading...