ATEL WB550 Apex by ATEL
User Manual
V2.3, July 20, 2023
Figure 10 Basic > LAN Settings
# IP Address - Displays the IP address of your router (default: 192.168.0.1).
# Subnet Mask - An address code that determines the size of the network.
Generally, use 255.255.255.0 as the subnet mask.
# DHCP - Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network, otherwise, you must configure
the address of your PC manually.
# Start IP Address - Specify an IP address for the DHCP server to start with
when assigning IP addresses. The default start address is 192.168.0.2.
# End IP Address - Specify an IP address for the DHCP Server to end with when
assigning IP addresses. The default end address is 192.168.0.254.
# Lease Time - The Lease Time is the amount of time a user will be allowed
connection to the router with their current assigned IP address. Enter the
amount of time in minutes and the user will be "leased" the IP address for that
time. After the time is up, the user will be assigned a new IP address
automatically.
# Static IP - IP/MAC binding function, the router will assign a fixed IP address to
a specific user using its MAC address according to the rules.
To Next Page
Loading...
Need help?
General
