Why is mouse movement so slow on ATEN Control Unit CN8000?
If mouse movements are extremely slow on the ATEN Control Unit CN8000, it indicates that too much data is being transferred for your connection speed. Try lowering the video quality to reduce the amount of video data being transmitted.
What to do if ATEN Control Unit CN8000 settings are lost after timeout?
To prevent losing configuration changes on the ATEN Control Unit CN8000 due to timeout, click 'Apply' regularly. The CN8000 uses the 'Apply' action to register your activity, save the settings, and reset the timeout counter.
Why won't Java Applet connect to ATEN Control Unit CN8000?
If the Java Applet won't connect to the ATEN Control Unit CN8000, ensure that Java 6 Update 3 or higher is installed on your computer. Also, verify that you are using the correct login string when specifying the CN8000's IP address. If issues persist, try closing and reopening the Java Applet.
How to fix out of sync remote mouse pointer on ATEN Control Unit CN8000?
If the remote mouse pointer is out of sync on the ATEN Control Unit CN8000, first, check the Mouse DynaSync Mode setting. If it's set to Automatic, change it to Manual. If it is already in Manual mode, use the AutoSync feature to synchronize the local and remote monitors. If the problem persists, use the Adjust Mouse feature.
Why is ATEN Control Unit CN8000 operating erratically?
If the ATEN Control Unit CN8000 is operating erratically, ensure it is started before the KVM switch. If the KVM switch was started first, reset or restart it. You may also need to reset the CN8000.
How to fix out of sync remote mouse pointer on ATEN CN8000 Control Unit?
To fix a remote mouse pointer that is out of sync on your ATEN Control Unit: 1. Check the Mouse DynaSync Mode setting. If it is set to Automatic, change the setting to Manual. 2. If in Manual mode, use the AutoSync feature to sync the local and remote monitors. 3. If the problem persists, use the Adjust Mouse feature to bring the pointers back in step. 4. If all above fails, refer to Additional Mouse Synchronization Procedures.
How to fix erratic operation of ATEN Control Unit CN8000?
If the ATEN Control Unit CN8000 is experiencing erratic operation, ensure it is started before the KVM switch. If the KVM switch was started first, reset or restart it. You may also need to reset the CN8000.
Why Java Applet won't connect to ATEN Control Unit CN8000?
If the Java Applet won't connect to the ATEN Control Unit CN8000, make sure that Java 6 Update 3 or higher is installed on your computer. Also, verify that you are including the correct login string when you specify the CN8000's IP address. As a last resort, close and reopen the Java Applet and try again.
Why is mouse movement extremely slow on ATEN CN8000 Control Unit?
If the mouse movement is extremely slow on your ATEN Control Unit, it indicates that too much data is being transferred for your connection to handle. To resolve this, lower the video quality to reduce the amount of video data being transmitted.
What to do if I can’t access ATEN Control Unit CN8000 with correct IP and port?
If you cannot access the ATEN Control Unit CN8000, even after correctly specifying the IP address and port number, and the CN8000 is behind a router, configure the router’s Port Forwarding (Virtual Server) feature.
General| Dimensions (WxDxH) | 81 x 200 x 25 mm |
|---|---|
| Product color | Black |
| Power consumption (typical) | 6.3 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 0 - 80 % |
| DC-in jack | Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Motherboard chipset | - |
| Built-in speaker(s) | No |
Weight and Dimensions| Depth | 200 mm |
|---|---|
| Width | 81.5 mm |
| Height | 25 mm |
| Weight | 490 g |
Introduces the CN8000 system, its purpose, and capabilities.
Covers Over-IP, Virtual Media, Console/OOB access, and Remote Power Control.
Includes ease of configuration, multi-platform support, and on-screen keyboard.
Features superior video quality, flexible desktop display, and mouse synchronization.
Covers advanced security, external authentication, and user management features.
Specifies hardware and software requirements for client computers accessing the system.
Lists required hardware and ports for servers connected to the CN8000.
Identifies and describes the components on the front panel of the CN8000.
Identifies and describes the ports and connectors on the rear panel.
Provides instructions for mounting the CN8000 unit.
Details the procedure for mounting the CN8000 in a standard equipment rack.
Explains how to mount the CN8000 onto a DIN rail.
Step-by-step guide for physically connecting and installing the CN8000.
Guides users through accessing the CN8000 via browser, including security alerts and credentials.
Displays a snapshot of the remote server and links to launch viewers.
Allows users to configure viewer, language, and password settings.
Introduces administrative utilities for configuring the CN8000's environment.
Displays the CN8000's status, firmware version, and network addresses.
Covers service ports, IP address assignment, DNS server, and network transfer rate.
Configures login authentication and authorization from external sources.
Sets up logging to a Log Server and configures SNMP trap notifications.
Covers disabling local authentication, RADIUS settings, and security.
Configures LDAP/LDAPS authentication and CC Management authorization.
Filters access by IP/MAC and allows specification of a login string.
Defines username/password policies and settings for failed login attempts.
Details user profile items like username, password, permissions, and account types.
Sets up operating parameters for the RS-232 serial port and console access.
Instructions for downloading and installing new firmware versions.
Guides on how to launch the WinClient Viewer application.
Describes the functions and appearance of the WinClient control panel.
Details using virtual media icons and performing media redirection.
Details redirecting smart card readers for server authentication.
Customizes control panel items and graphical settings.
Configures screen options, user info display, and snapshot parameters.
Describes viewing and managing the system's event log file.
Provides instructions for installing the Log Server administrative utility.
Guides on launching the Log Server application and its interface components.
Describes the two main panels of the Log Server interface: List and Event.
Guides on installing the stand-alone Windows Client program.
Explains how to launch the Windows Client application and input serial number.
Describes the connection screen for accessing the CN8000 via Windows Client.
Details the login process using username and password for the Windows Client.
Controls access and security configurations through the Admin Utility.
Manages user profiles and permissions within the Administrator Utility.
Manages firmware upgrades, backups, and restores via the Admin Utility.
Guides on launching the Java Client application and inputting serial number.
Describes the connection screen for accessing the CN8000 via Java Client.
Details the login process using username and password for the Java Client.
Guides on extending the schema to support CN8000 attributes.
Explains methods to determine and assign an IP address to the CN8000.
Provides solutions for common operational problems like erratic behavior or slow mouse movement.
Details virtual media support for different drive types and client viewers.
Provides a procedure to clear corrupted or forgotten administrator login information.
Lists the technical specifications for connectors, switches, emulation, video, and environment.
To Next Page